Oven
(2500W)
Heater
(2000W)
Kettle
(1500W)
Air Conditioner
(1000W)
Microwave
(500W)
Refrigerator
(120W)
Model | 36V-100AH |
Nominal Voltage | 36V |
Capacity | 100 Ah, 3840Wh |
Life Cycles | 5000 @ 80% DOD |
BMS Board | Yes (Internal) |
BMS Rating | 100A BMS |
Bluetooth Function | Yes |
Low Temp Cut Off Protection | Yes |
Mechanical Performance | |
---|---|
Cell Type | Grade A LiFePO4 Cells (Prismatic Cell) |
Weight | 63.27 lb |
Number of Cells | 12 |
Terminal | M8*16mm (L) |
Dimensions | 20.47″ (L) x 10.59″ (W) x 8.66″ (H) (520x269x220mm) |
Waterproof Rating | IP65 |
Charge Performance | |
Max Charge Current | 100A |
Recommended Charge Voltage | 42.6V-43.8V |
Maximum Batteries in Series | 1 |
Maximum Batteries in Parallel | 10 |
Maximum Configuration | 1S10P |
Discharge Performance | |
Max Discharge Current | 100A |
Zero Voltage | 35.55V |
Full Voltage | 40.2V-41.4V |
Max Depth of Discharge (DoD) | 100% |
Peak discharge Current | 500A(less than 3 seconds) |
Temperature Performance | |
Operating Temperature (Charge) | 0°C to 50°C (32°F to 122°F |
Operating Temperature (Discharge) | -20°C to 60°C (-4°F to 140°F) |
Operating Temperature (Storage) | -10~50℃ (14℉~122℉) |
A: Here are two methods for you to choose the charger: ① Use a 14.6V LifePO4 battery charger to charge each battery separately ② Use a 43.8V LifePO4 battery charger to charge batteries together
A: Generally, series wiring provides higher voltage, while parallel wiring provides greater current capacity. Therefore, 3 banks of 12 volt batteries need to be connected in series to get 36 volts.
A: You can test our battery voltage to see how much capacity is left. Generally, buyers receive batteries with half the capacity or less. If you want to charge the battery, you can charge it in series with a 36V charger, or in parallel with a 14.6V charger, or charge it separately with a 14.6V charger. However, you must make sure to use a LiFePO4 charger or one that has a lithium option. Also note, make sure the voltage of the charger matches the voltage of the battery.
A: You can test our battery voltage to see how much capacity is left. Generally, buyers receive batteries with half the capacity or less. If you want to charge the battery, you can charge it in series with a 36V charger, or in parallel with a 14.6V charger, or charge it separately with a 14.6V charger. However, you must make sure to use a LiFePO4 charger or one that has a lithium option. Also note, make sure the voltage of the charger matches the voltage of the battery.
Search for the keyword "BAT-BMS" in the Apple Store "App Store" or the Android Store "Google Play" to download, or scan the QR code to download.
A:1:
1: First you need to download the correct Bluetooth software
Search for the keyword "BAT-BMS" in the Apple Store "App Store" or the Android Store "Google Play" to download, or scan the QR code to download.
So far battery seems good but I have been unable to connect to a monitoring app. Have tried a lot of different apps. No instructions and have reached out to customer service several times with no response.
Thanks for subscribing!
This email has been registered!